How to Clean Cubic Zirconia Jewelry

How to Clean Cubic Zirconia Jewelry - WJD Exclusives

Updated October 20, 2026

The quick answer

For a sound, water-safe piece with cubic zirconia, gentle cleaning with lukewarm water, a little mild soap and a very soft brush is a useful starting point. Check the metal, plating, other stones and setting first: the whole piece determines the cleaning method.

Check the piece before you clean it

Cubic zirconia (CZ) is a diamond simulant, not the same material as diamond or the natural gemstone zircon. Advice for a stone alone may not suit its coating, adhesive, setting or the other materials in your jewelry.

If a stone moves, a prong catches, the finish is damaged or you do not know the materials, ask a jeweler before soaking or brushing it. For plated pieces, follow the seller’s instructions and avoid abrasive polishing.

A gentle cleaning routine

  1. Work over a soft towel with a small bowl, away from an open drain.
  2. If the piece’s care instructions allow it, use lukewarm water with a small amount of mild soap. Avoid hot water and harsh cleaning products.
  3. Use a very soft brush lightly around the stone and accessible setting to lift surface residue. Do not force bristles beneath loose stones.
  4. Rinse in a separate bowl of clean water rather than directly over the sink.
  5. Pat dry with a soft, lint-free cloth and let the piece dry fully before storing it.

What to avoid

Skip toothpaste, baking-soda scrubbing, bleach and other abrasive or harsh household treatments. Do not assume an ultrasonic or steam cleaner is suitable because the stone is CZ; coatings, settings and other components can change what is appropriate.

If it still looks cloudy

More scrubbing is not always the answer. Persistent cloudiness may need an inspection to distinguish remaining residue from surface wear or damage. Have the setting checked at the same time if the piece catches on fabric or a stone feels loose.

Keep it looking good between cleanings

Apply cosmetics before putting jewelry on, wipe away residue after wear and store pieces separately to limit rubbing. Follow any special instructions for the metal or plating.

For a WJD piece, send our team the product link so we can advise on the listed materials. Read next: caring for gold-plated jewelry.

Further reading: GIA: diamond simulants and GIA: caring for jewelry.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.